Go to Logpoint Help Center and download the required patch update file provided in .pak format.
Go to Settings >> System Settings >> Updates in the UI.
Click Upload Patch.
Browse to the previously downloaded patch update file and click Upload.
Click the Install Update icon in Actions.
Note
You can also upload the patch update files using the uploadpatch li-admin command before installing it from the UI. To learn more, go to uploadpatch.
Logpoint uses Netplan for network configuration starting from version 7.2.0. If your network configurations have not been migrated, it is recommended that you configure Netplan. For more details, go to Netplan Migration in Logpoint.
You can verify the installed version from Help >> About Logpoint in the navigation bar.
The following table lists the dependencies for each Logpoint version.
Version |
Can be installed on |
|---|---|
7.3.1 |
7.3.0 |
7.3.0 |
7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4 |
7.2.4 |
7.2.0, 7.2.1, 7.2.2, 7.2.3 |
7.2.3 |
7.2.0, 7.2.1, 7.2.2 |
7.2.2 |
7.2.0, 7.2.1 |
7.2.1 |
7.2.0 |
7.2.0 |
7.1.0, 7.1.1, 7.1.2, 7.1.3 |
7.1.3 |
7.1.0, 7.1.1, 7.1.2 |
7.1.2 |
7.1.0, 7.1.1 |
7.1.1 |
7.1.0 |
7.1.0 |
7.0.0, 7.0.1, 7.0.2 |
7.0.2 |
7.0.0, 7.0.1 |
7.0.1 |
7.0.0 |
7.0.0 |
6.12.2 |
6.12.2 |
6.12.0, 6.12.1 |
6.12.1 |
6.12.0 |
6.12.0 |
6.11.1, 6.11.2 |
6.11.2 |
6.11.1 |
6.11.1 |
6.10.0 |
6.10.0 |
6.9.0, 6.9.1, 6.9.2 |
6.9.2 |
6.9.0, 6.9.1 |
6.9.1 |
6.9.0 |
6.9.0 |
6.7.3, 6.7.4, 6.8.0 |
6.8.0 |
6.7.0, 6.7.1, 6.7.2, 6.7.4 |
6.7.4 |
6.7.0, 6.7.1, 6.7.2 |
6.7.2 |
6.6.6 |
6.6.6 |
6.6.0, 6.6.1, 6.6.2, 6.6.3, 6.6.4, 6.6.5 |
6.6.0 |
6.5.0, 6.5.1, 6.5.2, 6.5.3 |
6.5.3 |
6.5.0, 6.5.1 |
6.5.1 |
6.5.0 |
6.5.0 |
6.4.0 |
6.4.0 |
6.2.0, 6.2.1, 6.2.2, 6.2.3, 6.3.0 |
6.2.0 |
6.1.0, 6.1.1, 6.1.2 |
6.1.0 |
6.0.1, 6.0.2, 6.0.3, 6.0.4 |
6.0.1 |
6.0.0 |
6.0.0 |
5.6.4 |
5.6.4 |
5.6.0, 5.6.1, 5.6.2, 5.6.3 |
5.6.0 |
5.5.4, 5.5.5, 5.5.6, 5.5.7, 5.5.8, 5.5.9, 5.5.10, 5.5.11 |
5.5.4 |
5.5.3 |
5.5.3 |
5.5.2 |
5.5.2 |
5.5.0, 5.5.1 |
5.5.0 |
5.4.2 |
5.4.2 |
5.4.1 |
5.4.1 |
5.4.0 |
5.4.0 |
5.3.0, 5.3.1, 5.3.2 |
5.3.0 |
Security Update 5.0 |
Security Update 5.0 |
Security Update 3.0 |
Security Update 4.0 |
5.2.4 |
5.2.4 |
Security Update 3.0 |
Security Update 3.0 |
5.2.3 |
5.2.3 |
Security Update 2.0 |
Security Update 2.0 |
5.2.0 |
Note
You can see the status of each update patch from Settings >> System >> Updates in Logpoint v6.12.2 and earlier.
You can see the status of each update patch from Settings >> System Settings >> Updates in Logpoint v7.0.0 and later.
You can see the status of each security update patch from Settings >> System >> Security Updates in Logpoint v5.3.2 and earlier.
The Snapshots feature is only available in Logpoint v6.0.0 to v6.12.2 with ZFS filesystems.
Logpoint 7.3.0 patch upgrade requires Netplan for network configuration. Logpoint automatically migrates to Netplan during the v7.2.0 upgrade, but in some unsuccessful cases, manual migration is required. To learn how to migrate, go to Netplan Migration in Logpoint.
Due to the large size of the patch file, you must upload it from the console using the uploadpatch command before installing it from the UI.
If the ZFS pools you have created in a multipath environment are inactive and need to be imported manually, you need to:
After the installation is complete, use the zfs status command in the console to check if the ZFS pools are imported. The command lists the available ZFS pools with their status.
If the ZFS pools are not listed, use the zpool import command to import the pools:
zpool import -f <pool_name>
Contact Logpoint Support if you require assistance.
If you use Radius Authentication, upgrade it to v3.1.0 before upgrading Logpoint to v6.4.0. You can find the plugin in the Logpoint Help Center.
If you have a Logpoint Director setup, we recommend you upgrade all the Logpoint instances to v6.4.0 before upgrading the corresponding LPSM and Director Fabric instances to v1.2.0.
If you have a Logpoint Director setup, we recommend you upgrade all the Logpoint instances to v6.2.0 before upgrading the corresponding LPSM and Director Fabric instances to v1.1.0.
You must contact the Logpoint Support team before upgrading Logpoint to v6.0.0
If you have installed Threat Intelligence in your Logpoint, you must uninstall the plugin before upgrading to v6.0.0. Make sure you note your API keys to re-configure the threat sources after the upgrade.
If you have a Logpoint Collector or a Distributed Logpoint setup, we recommend you upgrade the main Logpoint to v6.0.0 before upgrading the other nodes.
The system reboots to complete the installation of Logpoint v5.6.0 and v5.6.2.
If you have a Logpoint Collector setup, we recommend you upgrade the main Logpoint to v5.6.0 before upgrading the collector nodes.
Due to the large size of the patch file, you must upload it from the console using the uploadpatch command before installing it from the UI.